Double Glazing Door Lock Repairs
Has your uPVC window or door mechanism become faulty? Perhaps the handles on your uPVC windows or doors are not aligned properly or are difficult to use.
It is crucial that your double glazed doors function smoothly, or else you will lose energy and increase the chance of burglary. Owen the Locksmith can repair your door lock at an affordable price.
Snapped Key
It can be quite frustrating when a key snaps into a lock. It could also be a security risk, as the door may not be locked and make you vulnerable to burglars. There are a few easy solutions you can use to fix the problem and make your door work again.
Keep calm. If you panic you may end up pushing the damaged key piece further into the lock.
Then spray WD-40 or another penetrating oil into the lock to help the broken piece to slide out more easily. You can also use a screwdriver to break any pieces that are stuck. If you have a chunk of the key stuck out then grab it using a paperclip or another thin metal object and pull it. Both methods are effective, but you need to be careful not to push the broken key piece further into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades also work well for this. If you do not have any of these handy, you can make use of needle-nose pliers to bend and create hooks. Additionally, you can use a pair of tweezers grasp and pull out the remaining pieces of broken keys.
If you can't get the broken piece of key out, try using a lock de-icer. This is usually available at most hardware stores. It works by freezing any moisture or ice that may be inside the lock.
If none of these solutions work, it could be time to call a locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms so that they are easier to use. You can schedule an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A broken cylinder can be a major security risk. It's a good thing that it's a simple repair for an expert locksmith to complete. To fix the cylinder locksmiths will need to tap it. They can do this using a hammer or other tool, but the best method is to make use of an extended match or piece of wire. Then, put the end of the match or wire close to the keyway. The locksmith will strike the lock to crack it open. This is better than using a hammer, which can damage the lock.
Overheating is the main reason for cylinder heads to crack. This can occur when the cylinder block and cylinder head are made of different metals, such as cast iron and aluminium. When the different metals are heated and cool at different rates, it may create hotspots in the local area that expand faster than the rest of the cylinder head, thus leading to cracks.
Another possible cause for cracks in the cylinder is corrosion. If the cylinder head and the block of the cylinder are not maintained properly, this could lead to rusting or corrosion and cause them to expand at a greater rates than they should. As time passes, this may also cause cracks.
If your uPVC window lock or door is stiff or requires an enormous amount of pressure to turn, it can be caused by several things. This can be caused by a malfunctioning locking mechanism or misalignment, or a worn-out handle.
Fortunately, this is an easy and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith will usually be able solve the issue within an hour after arriving at your residence. Depending on the needs of your home they can change the locking mechanism, change the window handles, or change the gearboxes. A professional locksmith will always be able to advise you on the most cost-effective solutions for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that give you an extra layer of protection against burglars. It's a small amount to get the peace of mind that comes from knowing your uPVC door is secured.
Broken Handle
It's not surprising that window handle locks may break. They are equipped with complex mechanisms that become less effective over time. If yours is damaged it may be difficult to identify the cause of the issue. Make sure you fix it correctly.
If the issue is with the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and help you to stop draughts. It is costly to replace or repair your handle if it is not done correctly and can also harm the frame and lock of your door.
Screwdriver When the window is open and the screw loose, loosen the handle. The screw should be on the inside of the backplate, which is usually hidden by the cap of the screw to enhance the appearance. It is not recommended to be able to replace any internal parts of the handle like the plates and levers on either side. Ideally, keep these in the same order so you can replace them in the event of a need.
Then, turn the handle so it's at 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle with another screwdriver. Once the screw is released, you'll be in a position to pull the handle off and take out the broken spindle. Replace it with a new spindle, ensuring it's the same length (you can buy them on the internet or in hardware stores). Screw it in the frame. Be cautious not to overtighten as this could damage the handle or the window frame.
Close the handle and try it. Hopefully, it will work smoothly and you'll be able to open your window once more.
Make sure to check that your uPVC window is shut correctly when you're working with the handle. If they don't cause draughts and damp in your home, as and also affecting the energy efficiency of your home. double glazing window repairs , like Core Sash Windows, will be in a position to adjust the hinges on your window frames to ensure they can shut properly.
Broken Spindle
It is usually the case that the spindle within a handle breaks rather than the handle itself. This is especially frequent in uPVC tilt and turn windows. These windows require a handle that acts as an locking device within the window frame. The handle is connected to a central rod which triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism is not able to open after the handle has been turned, it is most likely the spindle has been damaged. This can be a frustrating problem.
Luckily there are ways to remedy this situation. A good locksmith will be able to quickly and efficiently repair this issue. They can remove the window handle using a tool that removes the wheel portion of the mechanism, where the spindle goes. This is done without damaging the handle or causing other damage to the frame of the window.
After removing the wheel, the technician can inspect the spindle and determine what caused it to break. This involves disassembling the spindle, and then examining each component part, noting any damage or excessive wear. This procedure is typically carried out by technicians working in a clean environment.
The next step is to clean the damaged spindle. This will help remove any dirt or other debris that may be obstructing it from working normally. The spindle can be repaired or replaced. If the technician is replacing the spindle, the dowel can be used that is similar in size to the original. He will then drill matching holes into both pieces. This will ensure that the new spindle has a precise fit with the handle.
If the spindle that is damaged is beyond repair, it could be necessary to replace it entirely. Home centres sell generic replacements. However, If the style of your window is rare then it will be necessary to contact a wood worker or cabinet maker who can replicate the exact model for you. Once the new spindle is in place it can be attached to the handle by line up the holes for screws in the handle with the frame's existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.